Kami Jual Fluke 190-502/S ScopeMeter® Test Tool

Jual Fluke 190-502/S ScopeMeter® Test Tool. Sakha.co.id adalah distributor Fluke 190-502/S ScopeMeter® Test Tool di Indonesia. Fluke sendiri merupakan perusahaan multinasional yang focus pada bisnis Equipment.

Deskripsi Produk

Fitur utama :

The Fluke ScopeMeter 190-502/S combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications. The ScopeMeter 190-502/S is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more:

• Two electrically isolated inputs
• CAT III 1000 V / CAT IV 600 V safety rated
• 500 MHz bandwidth model
• 5 GS/sl  Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
• Dedicated 5000 Count digital multimeter
• Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
• ScopeRecord roll mode, capture waveform sample data for up to 48 hours
• TrendPlot, trend measurement readings for up to 22 days
• Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
• IP-51 rated for dust and drip proof to withstand harsh environments
• Isolated USB ports for memory devices and PC connectivity
• Li-Ion battery for extended operating timespan: up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
• Charge spare battery using optional external battery charger (EBC290)
• Easy-access battery door to make it easy to swap batteries
• A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock

Gain Four Times the Diagnostic Power Plus CAT IV Safety Rating

The Fluke ScopeMeter 190-502/S portable scope is double-insulated two-channel floating oscilloscopes safety rated for measurements in CAT III 1000 V/CAT IV 600 V environments.

Three-dimensional testing for industrial systems

Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including :

• Circuit voltage/current overloading
• Signal timing measurements and synchronization issuesl
• Attenuation/input impedance mismatch
• Signal fluctuation/drift

Three-phase testing for diagnosing VSD, power inverters, and converters

• Test for harmonics, transients and loads at the three-phase power input
• Troubleshoot DC to AC converters for faulty IGBT gates or filter circuits
• Test PWM output for reflections and transients or voltage unbalance

Safely measure from mV to kV

Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.

Take on the harshest conditions with the only IP-51-rated Scope on the Market

Rugged and shock-proof, all ScopeMeter portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants ensuring reliable accurate performance every time you need them.

Built in multimeter to quickly and conveniently perform precise measurements

Built-in digital multimeter 2-channel models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include VDC, VAC, VAC + DC, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.

Work a Full Shift on a Single Charge

New high-performance batteries take advantage of Li-ion technology to keep you going strong for up to four hours. And with the easy-access battery door you can make battery swaps fast.

Capture and Share Waveforms Easily with New USB connectivity

Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.

See a Stable Display Instantly with Connect-and-View&trade Triggering

Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.

Record Up to 48 Hours of High-Resolution Waveforms with ScopeRecord™

ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.) l  Stores events like motion profiles, UPS, power supply, and motor start-upsl  With the Stop-on-Trigger mode, the ScopeMeter 190-502/S automatically recognizes a power failure and stores the waveform data preceding itl  With the waveform zoom (up to 100x) you can look at the smallest details, like individual power cycles

Record up to 22 days with TrendPlot™ paperless recorder to find intermittent faults

Intermittent faults can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, sags, or starting and stopping a motor can also cause a machine to stop. The TrendPlot function in the Fluke ScopeMeter test tool helps find those faults by: l  Plotting minimum and maximum peak values and average over time up to 22 daysl  Plotting any combination of voltages, amps, temperature, frequency and phase for all four inputs, all with time and date stamp to pinpoint faults

Ikhtisar Produk : 

Fluke 190-502/S – 20 years of ScopeMeter® Test Tool Innovation

As the first two-channel portable scope safety rated CAT III 1000 V / CAT IV 600 V, the Fluke ScopeMeter 190-502/S combines an unprecedented level of performance, ruggedness, and portability with 500 MHz bandwidth and real-time sampling rates up to 5 GS/s and 200 ps resolution to capture noise and other disturbances. This model features deep memory up to 10,000 samples per channel; so you can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. Fluke ScopeMeter test tools are hand-held battery operated, designed to meet the demands of field service professionals.

Aksesori :

• Fluke BC190 Line Voltage Adapter / Battery Charger
• Fluke BP291 4800 mAh High Capacity Li-Ion Battery for Fluke 190-Series-II
• Fluke EBC290 External Battery Charger for BP290 and BP291
• Fluke C290 Hard Shell Protective Carrying Case for Fluke 190-series II
• Fluke HH290 Hanging Hook for ScopeMeter 190-Series II
• Fluke SW90W FlukeView ScopeMeter Software
• Fluke AS400 Probe Accessory Extension Set 1
• Fluke RS400 Probe Accessory Replacement Set
• ScopeMeter Voltage Probe-set, blue, 10:1, 300 MHz, 1000V CAT III, 600V CAT IV
• ScopeMeter Voltage Probe-set, grey, 10:1, 300 MHz, 1000V CAT III, 600V CAT IV
• ScopeMeter Voltage Probe-set, red, 10:1, 300 MHz, 1000V CAT III, 600V CAT IV
• Fluke VPS510-R ScopeMeter® Compact Probe

Baca Juga : Fluke 190-502 500 MHz ScopeMeter® Test Tool  

Fluke Corporation adalah produsen peralatan uji, pengukuran, dan diagnostik industri, termasuk peralatan uji elektronik. Itu dimulai pada tahun 1948 oleh John Fluke ketika dia bekerja di General Electric.

Fluke Corporation didirikan oleh John Fluke pada Oktober 1953 sebagai John Fluke Manufacturing Company, Inc., yang memproduksi peralatan pengukuran listrik.

Pada tahun 1987, Fluke bermitra dengan produsen elektronik Belanda Philips. Bersama-sama, perusahaan mengembangkan scopemeter, instrumen yang menggabungkan fitur osiloskop dan multimeter. Fluke membeli divisi pengujian dan pengukuran Philips pada tahun 1993 seharga $41,8 juta. Seri instrumen pengukuran Philips PM diganti namanya menjadi Fluke.

Fluke dibeli oleh Danaher Corporation pada tahun 1998. Danaher memisahkan beberapa anak perusahaan, termasuk Fluke, pada tahun 2016 untuk membuat Fortive.

Pomona Electronics adalah perusahaan yang mengkhususkan diri dalam peralatan dan aksesoris uji elektronik. Didirikan pada tahun 1951 oleh Joseph J. dan Carl W. Musarra, yang bersaudara. Didirikan untuk memproduksi rangkaian kabel uji untuk memeriksa tabung sinar katoda televisi. perusahaan dimulai di lokasi pabrik seukuran ruang tamu. Pada tahun 1976, dimiliki oleh ITT Industries, yang pada tahun 1999 menjualnya ke Fluke. Pada tahun 2002, Pomona Electronics memindahkan fasilitas manufakturnya ke Everett, Washington.

Jual Fluke 190-502/S ScopeMeter® Test Tool