Jual KEN0625040K Kennedy 2 0mm Ticn Kc3 Throwaway Cutter
Deskripsi Produk : Jual KEN0625040K Kennedy 2 0mm Ticn Kc3 Throwaway Cutter
Sakha.co.id adalah distributor KEN0625040K Kennedy 2 0mm Ticn Kc3 Throwaway Cutter di Indonesia. Kennedy sendiri merupakan perusahaan multinasional yang focus pada bisnis Cutting Tools. Distributor KEN0625040K Kennedy, Distributor KEN0625040K Kennedy, Agen KEN0625040K Kennedy, Agen KEN0625040K Kennedy, Agen KEN0625040K Kennedy, Supplier KEN0625040K Kennedy, Supplier KEN0625040K Kennedy, Supplier KEN0625040K Kennedy
Spesifikasi :
| Cutter Diameter | : 2mm |
| Flute Length | : 3.0mm |
| Overall Length | : 25.5mm |
| Chuck Clearance | : 9.5mm |
| Shank Diameter | : 6mm |
| End Mill Type | : Slot Drill |
| Number of Flutes | : 2 |
| Length Type | : Short |
| Finish/Coating | : TiCN |
| Plunge Type | : Centre Cutting |
| Cutting Direction | : Right Hand |
| Material | : Cobalt High Speed Steel |
| Material Application | : Aluminium |
| Aluminium Alloys | |
| Cast Iron | |
| Nonferrous Metals | |
| Steel | |
| Material Grade | : M35 |
| Milling Application | : End Milling |
| Slotting |
Baca Juga : KEN0625020K Kennedy 1 5mm Ticn Kc3 Throwaway Cutter, Onebiz.id
Short Series – Metric – TiCN Coated
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.
*Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.
Metric Tolerances:
Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020.
Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.
TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.
Seri Pendek – Metrik – Dilapisi TiCN
Kennedy KC3 sekali pakai 3* flute endmill dibuat dengan HSS-Co 5% yang membuatnya jauh lebih tangguh daripada HSS. Ini berarti bahwa endmill Kennedy dapat digunakan pada kecepatan dan umpan yang lebih tinggi yang pada gilirannya memberikan produktivitas yang lebih besar.
Cocok untuk pengeboran slot dan penggilingan akhir. Pemotong ditahan di adaptor/cekung dengan aksi sekrup set yang terletak di flat shank yang memberikan penggantian pemotong yang cepat dan mudah.
*Kecuali: pemotong 1mm, pemotong hidung bola 2mm dan 1/16″, semuanya memiliki dua seruling.
Toleransi Metrik:
Diameter: Lebih dari 1,00 ~ hingga 3,00. Toleransi: +0,013, -0,033.
Diameter: Lebih dari 3,00 ~ hingga 6,00. Toleransi: +0,020, -0,020.
Endmill Kennedy KC3 tersedia tidak dilapisi, dilapisi TiN dan dilapisi TiCN.TiN (Titanium nitrida) memberikan kekerasan permukaan di wilayah 2300HV yang menawarkan peningkatan ketahanan aus, umur pahat, dan produktivitas.
TiCN (Titanium Carbonitride) memberikan kekerasan permukaan di wilayah 3000-3500 HV, ketahanan aus yang sangat baik dan ketahanan panas yang baik. Lapisan ini digunakan untuk hal yang sama seperti TiN tetapi juga untuk baja keras, tahan karat, besi tuang, kuningan & perunggu.
Reviews
There are no reviews yet.