KBE2702090K Kobe Green Line FAG050M 50mm Mini Grinder

Jual KBE2702090K Kobe Green Line FAG050M 50mm Mini Grinder

Deskripsi Produk : Jual KBE2702090K Kobe Green Line FAG050M 50mm Mini Grinder
Sakha.co.id adalah distributor KBE2702090K Kobe Green Line FAG050M 50mm Mini Grinder di Indonesia. Kobe Green Line sendiri merupakan perusahaan multinasional yang focus pada bisnis Power Tools. Distributor KBE2702090K Kobe, Distributor KBE2702090K Kobe, Agen KBE2702090K Kobe, Agen KBE2702090K Kobe, Agen KBE2702090K Kobe, Supplier KBE2702090K Kobe, Supplier KBE2702090K Kobe, Supplier KBE2702090K Kobe
FAG050m For metal dressing, rust removal, weld preparation and automotive bodywork fabrication in hard to reach areas. Speed regulator. Safety release throttle. Heavy duty disc guard. Side exhaust. Ball bearing construction. Supplied with: 2x A60 (KEN230-0040K), 1x A80 (KEN230-0050K) and 1x A120 (KEN230-0060K) 50mm grinding discs. Disc size: 50 x 4 x 9.6mm (2″ x 5/32″ x 3/8″). Air inlet thread: 1/4″ NPT. Minimum air hose size (ID): 3/8″ (10mm). Air pressure: 90psi/6.3bar. Air consumption: 4cfm*. Sound pressure level: 83dBA. Sound power level: 92dBA. Vibration level: 1.7m/s2. Overall length: 140mm. *Based on a 15 second cycle per minute average use.

Spesifikasi :

Baca Juga : KBE2702070R Kobe Red Line GA1807L 180mm Heavy Duty Angle Grinder, Onebiz.id

Die grinders and rotary tools are handheld power tools used for grinding, sanding, honing, polishing, or machining material (typically metal, but also plastic or wood). All such tools are conceptually similar, with no bright dividing line between die grinders and rotary tools, although the die grinder name tends to be used for pneumatically driven heavy-duty versions whereas the rotary tool name tends to be used for electric lighter-duty versions. Flexible shaft drive versions also exist. The die grinder name comes from one of their earliest and archetypal applications, tool and die work, where they were used to create the precise contours of dies or molds. Especially before the advent of widespread CNC usage, they were heavily relied upon for contouring via manual skill comparable to a sculptor’s. CNC now provides much of the contouring for die and mold interior surfaces, but die grinders are still very useful for hundreds of cutting needs, from sculpture-like contouring in the absence of CNC, to cut-off of bar stock, to any of the cutting and grinding needs of fabrication, such as in the work of welders, boilermakers, millwrights, ironworkers (steel erectors), sheet metal workers (such as auto body workers and HVAC technicians), to woodworking (especially cabinet making), hacking, and other hobby or business pursuits. Die grinders are often used for engraving, cylinder head porting, and general shaping of a part.

The cutting may be done in various ways, including:

• Grinding with bonded abrasive stones (called by various names, such as mounted stones, mounted points, or grinding points)
• Machining with a burr or small drill bit or endmill
• Sanding with coated abrasive, such as small drums made of sandpaper mounted on an expanding rubber mandrel (also called an arbor)
• Honing with fine-grit mounted points
• Lapping with lapping compound and a mounted lap to embed it
• Polishing or buffing with cloth or fiber drums or flaps and polishing compound