KBE2704250K Kobe Red Line R5218 6mm Belt Sander

Jual KBE2704250K Kobe Red Line R5218 6mm Belt Sander

Deskripsi Produk : Jual KBE2704250K Kobe Red Line R5218 6mm Belt Sander
Sakha.co.id adalah distributor KBE2704250K Kobe Red Line R5218 6mm Belt Sander di Indonesia. Kobe Red Line sendiri merupakan perusahaan multinasional yang focus pada bisnis Power Tools. Distributor KBE2704250K Kobe, Distributor KBE2704250K Kobe, Agen KBE2704250K Kobe, Agen KBE2704250K Kobe, Agen KBE2704250K Kobe, Supplier KBE2704250K Kobe, Supplier KBE2704250K Kobe, Supplier KBE2704250K Kobe
Suitable for flat, concave and convex surfaces. Sanding arm can be rotate to any angle – improved access in confined spaces, saves space when storing the tool. Spare belt and hex wrench included. Ergonomic and comfortable rubber grip for reduces vibration. Low profile teasing throttle for precise speed control. Directional rear exhaust. Air inlet thread: 1/4″ NPT Minimum air hose size (ID): 10mm (3/8″). Air consumption: 4cfm* (113ltr/min). Air pressure: 90psi/6.2bar. Overall length/folded length: R5218: 305/207mm, R5228: 470/310mm, R5238: 420/255mm.

Spesifikasi :

Baca Juga : KBE2702880K Kobe Blue Line Xsb613k Belt Sander Kit, Onebiz.id

MBS025-Xk – Mini Belt Sander Kit
Suitable for shaping, paint removal, weld sanding, smoothing and rust removal on flat or curved surfaces. Supplied with 9 flexible abrasive belts and 5 contact arms. Rated for continuous use. Uses 6, 10, 13 and 20mm wide by 457mm long abrasive belts. Adjustable multi-positional sanding arm angle with a speed regulator and rear handle exhaust with noise baffler.
Free speed: 18,000rpm.
Air inlet thread: 1/4″ NPT.
Minimum air hose size (ID): 10mm (3/8″).
Air consumption: 4cfm* (113ltr/min).
Air pressure: 90psi/6.3bar.
Motor power: 0.6hp.
Noise Level: 84dBA
Sound Power; 92dBA
Vibration: 0.8m/s
Overall length: 390mm.

*Based on a 15 second cycle per minute average use.

Kit contents:
Contact arms: 6, 10, 13, 20mm with flat roller. 10mm with rounded roller.
Surface preparation file belts: 20mm: P80 grit (coarse), 13mm: P300 grit (fine)
Aluminium oxide file belts: 20mm: P60, P80 grit, 13mm: P80, P120 grit, 10mm: P120, P150 grit, 6mm: P150 grit. 4mm hexagon key L-wrench.

MBS025-Xk – Mini Belt Sander Kit
Cocok untuk membentuk, menghilangkan cat, mengamplas las, menghaluskan dan menghilangkan karat pada permukaan datar atau melengkung. Dilengkapi dengan 9 sabuk abrasif fleksibel dan 5 lengan kontak. Dinilai untuk penggunaan terus menerus. Menggunakan sabuk abrasif dengan lebar 6, 10, 13 dan 20 mm dengan panjang 457 mm. Sudut lengan pengamplasan multi-posisi yang dapat disesuaikan dengan pengatur kecepatan dan knalpot pegangan belakang dengan peredam bising.
Kecepatan bebas: 18.000 rpm.
Benang saluran masuk udara: 1/4″ NPT.
Ukuran selang udara minimum (ID): 10mm (3/8″).
Konsumsi udara: 4cfm* (113ltr/mnt).
Tekanan udara: 90psi/6.3bar.
Tenaga motor: 0.6hp.
Tingkat Kebisingan: 84dBA
Kekuatan Suara; 92dBA
Getaran: 0.8m/s
Panjang keseluruhan: 390mm.

*Berdasarkan penggunaan rata-rata siklus 15 detik per menit.

Isi paket:
Lengan kontak: 6, 10, 13, 20mm dengan roller datar. 10mm dengan rol bulat.
Sabuk file persiapan permukaan: 20mm: P80 grit (kasar), 13mm: P300 grit (halus)
Sabuk kikir aluminium oksida: 20mm: P60, P80 grit, 13mm: P80, P120 grit, 10mm: P120, P150 grit, 6mm: P150 grit. Kunci L-kunci segi enam 4mm.